Quick Programming Instructions for

Midland 74-200 SAME Weather Radio

1. Determine the FIPS code(s)of the counties you want programmed.

Athens-Clarke 013059 Morgan 013211

   Barrow 013013 Newton 013217

DeKalb 013089 Oconee 013219

Greene 013133 Rockdale 013247

Gwinnett 013135 Walton 013297

2. Repeatedly press DISP. MODE button on top of radio until “WEATHER ALERT

ON” flashes in display. (Note: If display flashes “WEATHER ALERT OFF,” press

ALERT button on front of radio to change to “WEATHER ALERT ON.”)

3. Open lid on top, right corner and press PROGRAM.

4. Press 1 to set station for these counties: Athens-Clarke, Barrow, Greene, Morgan,

Oconee, eastern Walton. Display should flash “CH. 1 162.400.”

Push 7 to set station for these counties: DeKalb, Gwinnett, Newton, Rockdale,

western Walton. Display should flash “CH. 7 162.550.”

5. Press YES. Display will show “VOICE.”

6. Press YES. Display will show “999999.”

7. Press YES. Display will show “_ _ _ _ _ _”

8. Enter FIPS county code. If you make a mistake, press NO.

9. Press YES. Display will show “000000.”

10 To enter another county press YES. Display will show “_ _ _ _ _ _”

11. Go back to number 8 above and continue for each county. When you have

entered the last county press PROGRAM. Display will flash “WEATHER ALERT

ON.”

To Check FIPS Codes:

1. Press PROGRAM.

2. Press YES.

3. Press YES.

4. Display will show number for first county. Press NO to cycle through numbers.

Press PROGRAM when finished.

IMPORTANT NOTES: Display must flash “WEATHER ALERT ON” for automatic weather alert feature to work! You must be able to hear the weather broadcast (press WEATHER button on front to toggle on and off) to make sure you are receiving a NOAA station to get weather warnings.

See the instruction manual packed with the unit for more details.